I remember flipping through a magazine a few years back and seeing a tiny picture of sunglasses that were adorned in beads. It was so small that I couldn’t exactly see all of the detail, but I remember staring at the picture for a really long time, wishing that I owned a pair.
Taking something you already own, and adding a few extra touches here or there is the perfect way to reinvent and make it feel new again. With the peak of festival season on its way, that mental image I took of those sunglasses popped back into my head, and it made me eager to finally try and make a pair of beaded sunglasses. It took a little bit of time and a steady hand, but the result was well worth it.
Here’s how to make your own pair of beaded sunglasses…
What you need:
Sunglasses (it’s best to use a pair with thicker arms)
Bendable wire (small enough to fit through the bead opening)
Super glue (I used this)
Before you get started, it’s good to have an idea of what kind of design you are going to do. I chose to do a chevron and stripe pattern. If you can’t decide on what to do, you can always pick out your color scheme first, and then just decided as you go along. You can always follow the design that I did as well!
First, take your wire and string on your first row of beads. I started out with a light blue.
Take your super glue and place a thin line of glue along the arm. (I lightly blew on the glue to allow it to set a bit before placing down my beads) Take the beaded wire and place it straight down on the glue, then lightly press down on the row of beads before sliding out the wire. If all goes well, you have your first row! Sometimes there might not be enough glue, so if the beads don’t stick the first time, take them off and apply another thin layer of glue before trying again.
Continue this method for each row of beads you place.
Be careful not to press down too hard on the beads when you are placing them so the super glue doesn’t seep through to your fingers.
When you are finished, give a good press over the beads with your finger and set your sunglasses aside for an hour or two to make sure the glue has completely set.
How cool do these look?! Have fun and get creative with your design! 🙂